概述

• Entry-level CPU in the S7-1500F Controller product range
• Can be used for safety functions up to SIL 3 according to IEC 61508 and up to PLe according to ISO 13849
• Suitable for standard and fail-safe applications with medium requirements for program scope and processing speed
• Used as central controller in production lines with central and distributed I/O
• Supports PROFIsafe in centralized and distributed configuration
• PROFINET IO IRT interface with 2-port switch
• PROFINET IO Controller for operating distributed I/O on PROFINET
• PROFINET I-Device for connecting the CPU as an intelligent PROFINET device under a SIMATIC or non-Siemens PROFINET I/O controller
• Isochronous mode

Note:
SIMATIC memory card required for operation of the CPU

應(yīng)用

The CPU 1511-1 PN is the cost-effective entry-level CPU for standard and fail-safe applications with medium requirements for processing speed and speed of response in discrete production technology. With its RAM size, this CPU is also suitable for medium-sized applications. It can be used as a PROFINET IO controller or as distributed intelligence (PROFINET I-Device). The integrated PROFINET IO IRT interface is designed as 2-port switch so that a linear topology can be set up in the system. In addition, the CPU offers comprehensive control functionalities via easy-to-configure blocks as well as the ability to connect drives via standardized PLC-open blocks.

設(shè)計(jì)

The CPU 1511F-1 PN has:

• a powerful processor:
  The CPU achieves a command execution time as low as 60 ns per binary command.
• extensive RAM:
  230 KB for program, 1 MB for data
• SIMATIC memory cards as load memory;
  permit additional functions such as datalog and archives
• Flexible expansion possibilities: single-tier configuration with max. 32 modules (CPU + 31 modules)
• Display with functions for the
  • Display of overview information such as station name, higher level designation, location designation, etc.
  • Display of diagnostic information
  • Display of module information
  • Display of display settings
  • Setting of IP addresses
  • Setting of date and time
  • Selection of the operating mode
  • Resetting of the CPU to factory settings
  • Disabling/enabling of the display,
  • Enabling of protection levels
  • display of safety mode, overall signature and date of the last download with signature change.
• PROFINET IO IRT interface for connecting distributed I/O via PROFINET
• Supports PROFIsafe in centralized and distributed configuration